-
Rudolph Silhouette Wood Stud Earrings | Hand Painted
- $14.95
- • .45 width x .45 inches in height • Made of Maple Hardwood • Painted with non-toxic acrylic paints and then sealed • Surgical Stainless Steel Posts with Clear Rubber Backs both hypoallergenic • Wood Pattern/grain/color may vary slightly • Remove before submerging in water to prolong life • Arrives gift ready in eco-friendly kraft box Did you know? Rudolph…
- Add to cart
-
Sailboat Engraved Stud Earring Blank
- $5.75
- Details: • .50 inches in width by .50 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original design by maddiethekat • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary slightly…
- Add to cart
-
Sailboat Jewelry Blanks Supply
- $5.85
- Details: • 1.00 inches in width by 1.00 inches in height and are 1/8 inch thick • Top hole measures .065 inches - I use 6mm jumprings 18 gauge • Original design by maddiethekat • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape added before engraving…
- Add to cart
-
Sand Castle Wood Stud Earring Blanks
- $5.75
- Details: • .55 inches in width by .40 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original drawn design by maddiethekat • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary…
- Add to cart
-
Santa 1 Engraved Wood Cabochons
- $5.75
- Details: • .40 inches in width by .50 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary slightly • These engraved wood cabochons…
- Add to cart
-
Santa 2 Engraved Wood Cabochons
- $5.75
- Details: • .43 inches in width by .50 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original design by V Payne • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary…
- Add to cart
-
Santa Boots and Hat Engraved Wood Cabochons
- $5.75
- Details: • .60 inches in width by .48 inches in height and are 1/8 inch thick • Original hand drawn laser design by maddiethekat • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color…
- Add to cart
-
Santa Boots and Hat Jewelry Blanks Supply
- $5.85
- Details: • 1.20 inches in width by .95 inches in height and are 1/8 inch thick • Top hole measures .070 inches - I use 6mm jumprings 18 gauge • Original hand drawn laser design by maddiethekat • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape…
- Add to cart
-
Santa Cat Maple Wood Stud Earrings | Hand Painted
- $14.95
- • .55 width x .50 inches in height • Made of maple hardwood • Original hand drawn design • Painted with non-toxic acrylics • Protective coating added to seal wood and paint • Surgical stainless steel posts with clear rubber backs, both hypoallergenic • Wood Pattern/grain/color/ painting may vary slightly • Remove before submerging in water to prolong life •…
- Add to cart
-
Santa Claus Engraved Wood Drop Charms
- $6.05
- Details: • 1.40 inches in width by 1.00 inches in height and are 1/8 inch thick • Top hole measures .065 inches - I use 6mm jumprings 18 gauge • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks •…
- Add to cart
-
Santa Hat Engraved Wood Cabochons
- $5.75
- Details: • .50 inches in width by .36 inches in height and are 1/8 inch thick • Original hand drawn laser design by maddiethekat • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color…
- Add to cart
-
Santa Hat Jewelry Blanks Supply
- $5.85
- Details: • 1.00 inches in width by .72 inches in height and are 1/8 inch thick • Top hole measures .065 inches - I use 6mm jumprings 18 gauge • Original hand drawn laser design by maddiethekat • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape…
- Add to cart
-
- Out of Stock
Santas Maple Hardwood Stud Earrings | Hand Painted
- $14.95
- • .46 width x .55 inches in height • Made of maple hardwood • Original hand drawn design by EricaDigitalDesign • Painted with non-toxic acrylics • Protective coating added to seal wood and paint • Surgical stainless steel posts with clear rubber backs, both hypoallergenic • Wood Pattern/grain/color/ painting may vary slightly • Remove before submerging in water to prolong…
- Read more
-
-
Saturn Planet Engraved Wood Cabochons
- $5.75
- Details: • .60 inches in width by .34 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary slightly • These Saturn planets engraved…
- Add to cart
-
Scarecrow Face Stud Earring Blank
- $5.75
- Details: • .52 inches in width by .47 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original drawn design by Tracy • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary…
- Add to cart
-
Scarecrow Jewelry Blanks Supply
- $5.85
- Details: • .80 inches in width by 1.30 inches in height and are 1/8 inch thick • original drawn design by Tracy • Top hole measures .065 inches - I use 6mm jumprings 18 or 20 gauge • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape…
- Add to cart
-
Sea Turtle 1 Wood Stud Earring Blanks
- $5.75
- Details: • .60 inches in width by .36 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original drawn laser design by maddiethekat • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may…
- Add to cart
-
Sea Turtle 2 Wood Stud Earring Blanks
- $5.75
- Details: • .58 inches in width by .50 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Original drawn laser design by maddiethekat • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may…
- Add to cart
-
Sea Turtles Poplar Hardwood Stud Earrings
- $13.95
- • .50 width x .55 inches in height • Made of poplar wood • Surgical Stainless Steel Posts with Clear Rubber Backs both Hypoallergenic • Wood Pattern/grain/color may vary slightly • Protective Coating added before engraving • Remove before submerging in water to prolong life • Arrives gift ready in eco-friendly kraft box Did you know? Sea turtles cannot retract…
- Add to cart
-
Seahorse Engraved Wood Cabochons
- $5.75
- Details: • .37 inches in width by .65 inches in height and are 1/8 inch thick • Original design by Natasha Hopson • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary…
- Add to cart
-
Seaweed Engraved Wood Cabochons
- $5.75
- Details: • .40 inches in width by .55 inches in height and are 1/8 inch thick • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may vary slightly • These stud earring blanks…
- Add to cart
-
Seed Bag Jewelry Blanks Supply
- $5.85
- Details: • 1.00 inches in width by .92 inches in height and are 1/8 inch thick • Top hole measures .065 inches - I use 6mm jumprings 18 gauge • Original hand drawn laser design by maddiethekat • Includes 4 pieces, for a total of 2 pairs • Unfinished Maple Hard Wood sanded smooth on both sides • Protective tape…
- Add to cart
-
Seed Bag Stud Earring Blanks
- $5.75
- Details: • .48 inches in width by .45 inches in height and are 1/8 inch thick • Original drawn laser design by maddiethekat • Includes 10 pieces, for a total of 5 pairs • Unfinished Maple Hardwood sanded smooth on both sides • Protective tape added before engraving to prevent burn marks • Photos show an example, wood grain/color may…
- Add to cart
-
Seed Bags Stud Earrings
- $14.95
- • .42 width x .50 inches in height • Original laser design by maddiethekat • Made from sustainable maple hardwood • Painted with non-toxic acrylics • Protective coating added to seal wood and paint • Surgical stainless steel posts with clear rubber backs, both hypoallergenic • Wood Pattern/grain/color/ painting may vary slightly • Remove before submerging in water to prolong…
- Add to cart
